We supply fasteners and hardware to the following industries:
  
Aerospace
   Appliance
   Automotive
   Defense
   Naval/Maritime
   OEM
   Window and Door

Fasteners & Hardware
  Anchors
  Bolts
  Cap Screws
  Carriage Bolts
  Door Hardware
  Electronic Hardware
  Hex Bolts
  Structural Bolts
Nuts
  Finished Nuts
  Lock Nuts
  Weld Nuts
Pins
Rivets
Rods
Sc
rews
 
Clamps    
  Hangers
  Hex Head Cap Screws
  Machine Screws
  Set Screws
  Sockets
  Struts
Tapping Screws
Washers
  Bevel Washers
  Bellville Washers   
  Domed Washers
  Flat Washers
  Lock Washers
  Tooth Washers
Window Hardware
Door Hardware

Services
  Kitting / Bagging
  Private Labeling
  Stocking Programs 
    - Just-in-time
    - Kan Ban
    - Zero Inventory
    - Consignment

 

MS25281 : Mil-Spec Hardware

MS25281 : Mil-Spec Hardware Specification
Clamp, Loop, Plastic, Wire Support

MS25281 CAD DrawingClick on drawing for larger view

REQUIREMENTS:

MATERIAL:

1. NYLON: Heat Stabilized Composition, MIl-M-20693, Composition A, Type 1.

COLOR: Natural

METAL EYELET: Aluminum, anodize in accordance with MIL-A-8625.

Notes:

  • 1. Dimensions are in inches. Dimension “D” is applicable in closed position.
  • 2. Remove all burrs and sharp edges: break all sharp corners. Mold marks and normal vent flash are permissible.
  • 3. Metric equivalents (to the nearest .01 mm) are given for general information only and are based upon 1 inch = 25.4 mm.
  • 4. Side gate cut-off permissible providing “D” diameter and inner edge radius are not disturbed.
  • 5. Configuration may vary from that shown, provided dimensions are not exceeded.
  • 6. Tensile strength: Tensile strength for base numbers 2 through 10 shall be 100 pounds minimum and for dash numbers 11 through 32 shall be 225 pounds minimum.
  • 7. Mounting holds may be slightly elongated or dished for easy removal from mold.
  • 8. Odd dash numbers 19 through 31 for Style R are not currently available.
  • 9. Example of part numbers:
  • The letter “F” or “R” shall precede the dash number size to indicate whether the clamp has a flat or ribbed inner diameter. MS25281F6 clamp loop plastic, wire support, flat inner diameter 3/8 inch bundle diameter. MS25281-r6 clamp, loop, plastic, wire support, ribbed inner diameter, 3/8 inch bundle diameter.
  • 10. For design feature purposes this standard takes precedence over procurement documents referenced herein.
  • 11. Referenced documents shall be of the issue in effect on date of invitations for bids, or request for proposal except that referenced adopted industry documents shall give the date of the issue adopted.

Need the Spec?

Click here to download MS25281 Specification
(PDF Format).



Great Lakes Fasteners
2057 Case Parkway
Twinsburg, Ohio 44087

Ohio: 330-425-4488
Nationwide: 800-321-3168
Fax: 330-425-4705

ISO 9001:2008 Certified

  • Need a spec or quote?
  • It's easy-
  • call 800-321-3168
  • or fill in below

Copyright Great Lakes Fasteners, Inc. 2008

GLFTechnical Fastener Supply specializes in a wide range of industrial and military specification (MIL Spec) fasteners; including MS fasteners, AN Fasteners, and NAS Fasteners.